Welcome on Sanitaria Triestina Store
  • DIATERMO MB250 HOSPITAL

DIATERMO MB250 HOSPITAL

DIATERMO MB250 and MB400 are high frequency electrosurgical
equipments suitable to deliver current for monopolar cut and coagulated cut (with different levels of coagulation),
bipolar cut and coagulation. During bipolar coagulation there is an automatic “Autostart-Autostop” system activating when
coagulation is reached.
A range of ten different modes and power levels can be easily
stored and recalled. It is possible to use either single plate
neutral electrodes or split conductive zone electrodes in order to
control impedance stability of plate to patient contact during
the surgical operation.
Control of the units is made by front panel keys and display;
mains inlet is located on the rear panel. The units have
automatic control systems to monitor the internal parameters
and alert on possible damages/errors. The operational
parameters used are constantly stored so that the last selected
parameters are recalled, every time the unit is switched on or
the operative method is changed. The level of sound can be
adjusted, every operator can choose his own level according to
the environmental working conditions. The units can work
through handles with pushbuttons or without pushbuttons but
with double foot switch. It's possible to connect bipolar forceps
to the unit for the bipolar functions.
  • Product code: 30694
  • Units: 1 pc.
  • Specifications:
    • Work condition memorization_x000D_
    • Digital power visualization_x000D_
    • Continuous check control_x000D_
    • Automatic control of the plate-patient connection_x000D_
    • Automatic control of the impedance_x000D_
    • Automatic control of excessive time for distribution_x000D_
    • Automatic control of the supplied power level_x000D_
    • Bipolar coag with automatic activation/disact._x000D_
    • Consistent with Argon unit_x000D_
    • Minimum preselectable power: 0_x000D_
    • Unitary power step for powers from 0 W to 50 W_x000D_
    • Power step 10 for powers higher than 50 W_x000D_
    • Digital level display_x000D_
    • Selection of power through push-buttons_x000D_
    • Size LxHxP mm: 470 x 150 x 380_x000D_
    • Weight (kg): 18_x000D_
    • Selectable mains power (Vac): 115-230_x000D_
    • Mains frequency (Hz): 50-60_x000D_
    • Fuses 230Vac (5x20) TIMED: 2xT 4A/5A_x000D_
    • Fuses 115Vac (5x20) TIMED: 2xT 8A/10A_x000D_
    • Electrical input power (VA): 800/1000_x000D_
    • Electrical input current (230Vac) (A): 3.5/4.5_x000D_
    • Electrical input current (115Vac) (A): 7/9_x000D_
    • Five steps adjustable sound level_x000D_
    • Self-check_x000D_
    • Power accuracy output warning_x000D_
    • Skin Plate Electronic Control (plate-patient control)_x000D_
    • Split or not split patient plate allowed_x000D_
    • Working condition storing: last 10 setup_x000D_
    • Electrical Class (EN60601-1): ICF_x000D_
    • MDD 93/42/EEC Class: II b_x000D_
    • EN55011 (CISPR 1 1) Class (Class/Group): 2/B_x000D_
    • Patient circuit: F_x000D_
    • Duty Cycle (action/pause) in seconds: 10-30_x000D_
    • Output power control by foot-switch or finger-switch_x000D_
    • Defibrillation-proof_x000D_
    • Ten seconds delivery warning (OVT)_x000D_
    • Equipotential binding_x000D_
    • Metallic cabinet_x000D_
    • Polycarbonate covered panels_x000D_
    • Conform to EN60601-1 (1998)_x000D_
    • Conform to EN6060 1 - 1 -2 (2003)_x000D_
    • Conform to EN6060 1 -2-2 (2000)_x000D_
    _x000D_
    Monopolar woring frequency: 425 kHz_x000D_
    Maximum output power monopolar pure CUT: 250 W _x000D_
    Impedance: 300 ohm_x000D_
    Maximum output voltage: 1500 Vpp_x000D_
    Crest Factor: 1,6_x000D_
    Maximum output power monopolar cut-coag CUT80%: 220 W_x000D_
    Impedance: 300 ohm_x000D_
    Maximum output voltage: 1500 Vpp_x000D_
    Modulation factor: 10Khz_x000D_
    Duty cycle: 80%_x000D_
    Crest Factor: 1,8_x000D_
    Maximum output power monopolar cut-coag CUT60%: 200 W_x000D_
    Impedance: 300 ohm_x000D_
    Maximum output voltage: 1500 Vpp_x000D_
    Modulation factor: 10Khz_x000D_
    Duty cycle: 60%_x000D_
    Crest Factor: 2,1_x000D_
    Maximum output power monopolar cut-coag CUT40%: 150 W_x000D_
    Impedance: 300 ohm_x000D_
    Maximum output voltage: 1500 Vpp_x000D_
    Modulation factor: 10Khz_x000D_
    Duty cycle: 40%_x000D_
    Crest Factor: 2,6_x000D_
    Maximum output power monopolar cut ENHANCED: 150 W_x000D_
    Impedance: 300 ohm_x000D_
    Maximum output voltage: 1500 Vpp_x000D_
    Modulation factor: 1,25 Khz_x000D_
    Duty cycle: 5%_x000D_
    Crest Factor: 1,6_x000D_
    Maximum output power monopolar cut-coag BLEND: 150 W_x000D_
    Impedance: 500 ohm_x000D_
    Maximum output voltage: 2500 Vpp_x000D_
    Crest Factor: 1,6_x000D_
    Maximum output power monopolar coagulation SPEEDY: 100 W_x000D_
    Impedance: 500 ohm_x000D_
    Maximum output voltage: 2500 Vpp_x000D_
    Modulation factor: 8-12Khz_x000D_
    Duty cycle: 20%_x000D_
    Crest Factor: 3,4_x000D_
    Maximum output power monopolar coagulation DEEP: 100 W_x000D_
    Impedance: 500 ohm_x000D_
    Maximum output voltage: 800 Vpp_x000D_
    Crest Factor: 1,6_x000D_
    Maximum output power monopolar spray-coagulation SPRAY: 60 W_x000D_
    Impedance: 2000 ohm_x000D_
    Maximum output voltage: 4500 Vpp_x000D_
    Modulation factor: 1 Khz_x000D_
    Duty cycle: 20%_x000D_
    Crest Factor: 3,4_x000D_
    Maximum output power monopolar spray-coagulation SPRAY ARGON: 60 W_x000D_
    Impedance: 2000 ohm_x000D_
    Maximum output voltage: 4500 Vpp_x000D_
    Modulation factor: 1 Khz_x000D_
    Crest Factor: 3,4_x000D_
    Bipolar Working Frequency: 525 kHz_x000D_
    Maximum output power bipolar CUT: 120 W_x000D_
    Impedance: 150 ohm_x000D_
    Maximum output voltage: 800 Vpp_x000D_
    Crest Factor: 1,5_x000D_
    Maximum output power bipolar cut-coag CUT80%: 100 W_x000D_
    Impedance: 150 ohm_x000D_
    Maximum output voltage: 800 Vpp_x000D_
    Modulation factor: 10 Khz_x000D_
    Duty cycle: 80 %_x000D_
    Crest Factor: 1,7_x000D_
    Maximum output power bipolar cut-coag CUT60% 100 W_x000D_
    Impedance 150 ohm_x000D_
    Maximum output voltage: 800 Vpp_x000D_
    Modulation factor: 10 Khz_x000D_
    Duty cycle: 60 %_x000D_
    Crest Factor: 2,0_x000D_
    Maximum output power bipolar cut-coag CUT40%: 60 W _x000D_
    Impedance: 150 ohm_x000D_
    Maximum output voltage: 800 Vpp_x000D_
    Modulation factor: 10 Khz_x000D_
    Duty cycle: 40 %_x000D_
    Crest Factor: 2,4_x000D_
    Maximum output power bipolar cut-coag BLEND: 100 W_x000D_
    Impedance: 300 ohm_x000D_
    Maximum output voltage: 1100 Vpp_x000D_
    Crest Factor: 1,7_x000D_
    Maximum output power bipolar coagulation COAG: 70 W _x000D_
    Impedance: 100 ohm_x000D_
    Maximum output voltage: 400 Vpp_x000D_
    Crest Factor: 1,5_x000D_